Whistle/Tweeter Digital Servo Drives Installation Guide PDF Manual

This guide is delivered subject to the following conditions and restrictions: o This guide contains proprietary information belonging to Elmo Motion
Control Ltd. Such information is supplied solely for the purpose of assisting users of the Whistle and Tweeter servo drives in their installation. o The text and graphics included in this manual are for the purpose of illustration and reference only. o The specifications on which they are based
are subject to change without notice. Elmo Motion Control and the Elmo Motion Control logo are trademarks of Elmo Motion Control Ltd. o Information in this document is subject to change without notice.

This installation guide describes the Whistle and Tweeter servo drives and the steps for its wiring, installation and power-up. Following these guidelines ensures maximum functionality of the drive and the system to which it is connected.

In order to achieve the optimum, safe operation of the Whistle and Tweeter servo drives, it is imperative that you implement the safety procedures included in this installation guide. This information is provided to protect you and to keep your work area safe when operating the Whistle and Tweeter as well as the accompanying equipment.

Please read this chapter carefully before you begin the installation process. Before you start, ensure that all system components are connected to earth ground. Electrical safety is provided through a low-resistance earth connection. Only qualified personnel may install, adjust, maintain and repair the servo drive. A “qualified person” has the knowledge and authorization to perform tasks such as transporting, assembling, installing, commissioning and operating motors. The Whistle and Tweeter servo drives contain electrostatic-sensitive components that can be damaged if handled incorrectly. To prevent any electrostatic damage, avoid contact with highly insulating materials, such as plastic film and synthetic fabrics.

Place the product on a conductive surface and ground yourself in order to discharge any possible static electricity build-up. To avoid any potential hazards that may cause severe personal injury or damage to the product during operation, keep all covers and cabinet doors shut.

Download Whistle/Tweeter Digital Servo Drives Installation Guide PDF Manual


Related E-Books:


March 27, 2009 | Posted in Others

Comments

Leave a Reply




eXTReMe Tracker
Love cooking? Check out food recipes at eFoodDepot.com