Viper Remote Start Keyless Entry Model 5301 Owner’s Guide

The system requires no specific maintenance. The 2- way remote uses two CR2016 cell batteries and the1- way remote uses one CR2032 cell battery. When the battery begins to weaken, the operating range is reduced.

When the batteries are low, the 2- way remote emits two groups of beeps, the LED flashes, and additional horn honks are emitted when unlocking. It is time to change the batteries. When the battery is low on the 1- way remote the only indication is additional horn honks emitted when unlocking. Note: Horn honk is an optional feature.

Battery Replacement. Rear View
1. Slide the battery cover up by applying equal pressure at its top and bottom (the arrow on the cover indicates the direction), remove the cover from the remote control housing.
2. Gently pry up on the battery to remove it from the holder. Insert a new battery into the holder and under the clip with the posi-
tive (+) side up. Replace the battery cover. The remote control is now ready for use.

Download Viper Remote Start Keyless Entry Model 5301 Owner’s Guide


Related E-Books:

    None Found

November 15, 2011 | Posted in Electronic Manual

Comments

Leave a Reply