V500 Sim Dialer PDF User Manual

1. Features:
1. Work with GSM/ UMTS /3G SIM card.
2. Easy to be installed.
3. Will store 2 access numbers. PIN code for calling cards can be set up by end-users
4. Will reroute user’s calls after programming the specified access number and PIN codes.
5. Will set prefix to go though or by pass the SIM dialer.
6. Supports prefix removing function
7. Intelligent auto pickup least cost route (LCR) function
8. System PIN to protect data from unauthorized changing.
9. Supports four working modes:
a. Carrier select mode
b. Force carrier select mode
c. Call through wait for IVR prompting
d. Call back mode
10. No need to change user’s direct dialing habit while enjoying VOIP services:
a. Support dialing directly from the Contacts and phone book, and dialed missed history list
b. Support dial directly from mobile phone’s missed calls/ call record/ call history/ recent calls.
11. Compatible with many mobile phones, Nokia, Motorola, Sony Ericsson, Samsung, LG, Blackberry, Iphone and more.
12. Supports remote configuration via SMS configuration toolkit!
13. Supports unlock function! (to unlock your mobile phones)
14. Supports keypad programming.
15. Supports configuration via programmer toolkit at site!
16. Supports SMS triggered callback —new function!

2. Installation
1). For most phones, you just attach the sim dialer to GSM sim and insert both of them into sim holder. For few model mobile phones, you might cut a corner or punch a hole on your SIM card which size is just fit the chipset on the SIM dialer. Stick it to your SIM card tightly, and then put them together to the SIM holder easily. Please note that cutting a hole on SIM card is not necessary, but doing so could make a better connection. If necessary, you can punch a hole on SIM for easier insertion into SIM holder
2). After proper installation, power on your mobile, you will find the STK menu appears in your mobile phone menu(this means your mobile phone support sim dialers), input the system password (for example 8888), and you could enter the STK menu for setting up SIM dialer.
3. Operation instruction:
1) enable/disable the IP dialer service Choose ON/OFF in Menu 1, enable dialer use or not use IP service. On means use dialer IP service, off means don’t use IP dialer service.
2) Set PIN code for calling cards
You could set 2 account numbers, including PIN. On the Login menu, you could input the pin code for the calling card. If there are more than one stages example, Account and PIN, use * to separate them. For pinless system, just keep it blank.
3) Set PIN code for calling cards
Press log in and enter system password,you can see the sub-menu of SET ACCESS E.g. You can set access number of 17951 (*# stands for Direct Callthrough mode) There are three main working modes, the 2 symbols in front of access number will tell the sim dialer to work with Direct call-through, Call-through with IVR or Callback mode.
a. Direct Callthrough mode. add *# in front of access number. E.g.: *#17951
b. Call through wait for IVR. Add ## in front of access number. e.g.: ## 10086
c. Call back mode. Add ** in front of access number e.g.: **800810000
Below are full instructions for setting access number with different working modes.
A). Direct Call-through access number setting
Example, to set up a direct call-through access number 17951,you will set as follows:

Download V500 Sim Dialer PDF User Manual


Related E-Books:

    None Found

May 21, 2010 | Posted in Cell Phones

Comments

Leave a Reply