SMART Board Basics for Macintosh Computers PDF Guide
This Quick Reference Guide provides an overview of the information you need to begin using a SMART Board interactive whiteboard. Before you begin, make sure SMART Board software has been loaded on your computer.
Starting the SMART Board Interactive Whiteboard Ensure the interactive whiteboard and projector are connected to the computer. 2 Turn on the projector, then the computer. The interactive whiteboard draws power from the computer and will be activated automatically. The Ready Light, indicating the status of your interactive whiteboard, will be red while the SMART Board and the computer are establishing communication.
NOTE: Depending on the model of SMART Board interactive whiteboard you are using, the Ready Light is either located on the right side of the pen tray or the lower-right of the frame bezel. Log on, if required, using the computer keyboard. When the Ready Light on the pen tray turns green, the computer and the interactive whiteboard have established communication. The whiteboard is now touch sensitive, and you can
Orienting the SMART Board Interactive Whiteboard You should orient your interactive whiteboard when setting it up, or if either the projector or interactive whiteboard has been moved since you last used it.Press and hold the Keyboard and the Control-click button simultaneously until the Orientation screen appears. Begin orientation at the upper-left corner. Press your finger squarely in the center of each red cross in the order indicated by the white, diamond-shaped background.
Your Finger Is Your Mouse
A press on a SMART Board interactive whiteboard is the same as a click with your mouse. To open an application such as an Internet browser, simply press or double-press the application with your finger.
Download SMART Board Basics for Macintosh Computers PDF Guide
Related E-Books:
- None Found
September 20, 2009 | Posted in Notebook
Comments
Leave a Reply