Programmable Electronic Thermostat Model TH141A-HC-28 Instruction PDF Manual

1.1 REMOVE THE OLD THERMOSTAT
1 – Cut the power source to your heating or air conditioning system.
2 – Remove the cover of the old thermostat.
Caution: If, upon removing the wall plate, you see that it is mounted on a junction box (similar to the junction box located behind an electrical switch or outlet), this may indicate that it is a 120 V/240 V system. For more security, consult a qualified electrician to check the installation.

1.2 INSTALL THE NEW THERMOSTAT
For a new installation, choose a location about 1.5 meters (5 feet) above the floor, with good air circulation. The thermostat must be installed on an inside wall. Avoid locations where there are:
a) air drafts (top of a staircase, air outlet,…)
b) dead air spots (behind a door,…)
c) direct sunlight
d) concealed chimneys or stove pipes.

INSTALL AND CONNECT THE THERMOSTAT
1. Remove the screw holding the thermostat mounting plate.
2. Lift the lower part to separate the plate from the thermostat.
3. Mount the plate on the wall using the screws supplied.

Download Programmable Electronic Thermostat Model TH141A-HC-28 Instruction PDF Manual


Related E-Books:

    None Found

January 25, 2009 | Posted in Thermostats

Comments

Leave a Reply