Power Amplifier PDF User Manual

This amplifier can be mast mounted with the stainless steel U-bolts as shown in Figure 5 and Figure 6. Referring to the outline for a correct positioning. Carefully tighten the screws with the supplied nuts. Be careful not to over-tighten the screws or damage to the RF connectors on the amplifier. Because the amplifier is a closed unit, these connections can not easily be repaired.

This audio device can also be mounted on a flat surface using one of the mounting holes on the unity of the mounting flanges. Radio transmitters, receivers and RF cables should be protected when attracted by lightning. The increase protectors include rapid response gas arrestor to be filled by means of low voltage for fast rise time transients. The device is configured to minimize circuit capacity and performance can be guaranteed to 2GHz. Standard models provide protection for receivers and transmitters with a 1kW level.

Installing this device in the outdoors may be subject to lightning. For good protection of your equipment, you’ll need lightning arrestor to prevent an electrical wave to travel through the cable and antenna in the building. Lightning systems for a building is more forgiving than the protection of electrical devices. A building at up to 100,000 volts, but electrical equipment may be damaged by only a few volts.

Direct earth grounding of the antenna and the Lightning Protector is necessary to protect the installation of lighting and the construction of static electricity. The ground terminal is located on the lightning protector confirmed with this unit. Connect one end of the cable to the earth ground terminal and the other end to a good ground connection.

Download Power Amplifier PDF User Manual


Related E-Books:

    None Found

July 21, 2009 | Posted in Audio Video

Comments

Leave a Reply