Panasonic DMC-TZ5 Digital Camera Firmware PDF Installation Instructions
Check Firmware Version
1) Insert an SD Card with at least one image (photo/picture) into the SD Card Slot of the camera.
2) Set the camera’s Power Switch (A) to ON.
3) Set Playback/Recording Switch (B) to PLAYBACK.
4) While holding down the E.ZOOM button (C), press the MACRO button (D).
NOTE: This will display the firmware version on the LCD screen (E).
5) Power the camera OFF after checking the firmware version.
CAUTION: If the firmware version in the camera is the same or higher than the firmware version downloaded or received, a firmware update is unnecessary.
Preparation of SD Card
1) Insert an 8 MB or larger SD Card into camera.
2) Format the SD Card using FORMAT option in camera menu.
3) Take 2 photos with camera.
4) Remove SD Card from camera.
5) Power the camera off.
Copy Firmware to SD Card
Use one of the below methods to copy the firmware file to the SD Card. 4.1 Using SEND TO
1) Insert the SD Card with the 2 photos into the SD Card Slot in the PC or USB Reader/Writer connected to the PC. (NOTE: If an SD Card Slot or USB Reader/Writer is not available, the camera can be connected to the PC via USB to transfer the firmware update to the SD Card.)
2) Right click on the TZ5_a.bin icon on the DESKTOP, mouse over SEND TO, and then left click on SECURE DIGITAL STORAGE DEVICE (the drive designated as the SD Card Drive).
Download Panasonic DMC-TZ5 Digital Camera Firmware PDF Installation Instructions
Related E-Books:
- None Found
November 20, 2009 | Posted in Digital Camera, Panasonic Manual
Comments
Leave a Reply