Overhead Mounting Video and DVD Player Cars PDF Installation Instructions Manual
Remove dome light from the center of the ceiling behind the front seats. The clear cover will usually snap off and the fixture will usually be mounted with screws. Unplug the factory dome light. Remove one set of side molding to allow viewing and proper location of center cross beam under the headliner. Mark and cut a tiny hole in the center to verify your beam location.
Remove the overhead mounting plate to use as a template for marking your ceiling headliner audio player. Use the mounting plate to line up and center over the support beam and cut out. Use super soft leaded pencil to draw a line around the mounting bracket top outline. (be careful not to use the wrong side of the bracket; have the mounting feet side facing down and the arrow pointing toward the rear of the vehicle.
Use your rules as a straight edge to mark inside the lines you drew around the bracket to have clean cutting edges. Remove all excess material with your box cutter or razor blade from the inside dimensions outlined in step #3. Do not cut outside lines you established.
Download Overhead Mounting Video and DVD Player Cars PDF Installation Instructions Manual
Related E-Books:
- None Found
July 28, 2010 | Posted in Audio Video, Electronic Manual
Comments
Leave a Reply