iGPS-M Receiver High Sensitivity 150dBm PDF User Manual

Installation
Step I:Check your iGPS-M package Please check the iGPS-M package. If any items are missing or damaging, please contact our distributor immediately. The standard package of iGPS-M contains:
iGPS-M Receiver
iGPS-M Driver & Utility CD
Warranty Card
Quick Installation Guide
RS-232 cable or USB cable
With different brand/type of handheld device, the iGPS-M receiver needs to use different type of car charger. Our company provides all kinds of car chargers, please refer to the section of iGPS-M car chargers and cables on page 7. If the iGPS-M receiver you purchased provides a car charger, please make sure it is suitable for your handheld device.

Step II:Connect iGPS-M receiver to PC/Lap top or handheld device Using RS-232 cable: please follow the illustration as below. Using USB connector: please follow the illustration as below. Before the USB connector plugs in your PC/Lap top, please have your USB Driver Installation ready. (See the USB Driver installation guide for detail information). Remember to plug in the USB connector after your PC/Lap top started properly. Otherwise, your PC/Lap top operating system might judge iGPS-M as a mouse and affect the normal operation.

Using car charger: Please follows the illustration as below. You have to plug in the connector into Car Socket in order to have power supply for both iGPS-M receiver and handheld device.

Step III:Check if the LED is flashing. Once your PC/Lap top or car charger supplies power, the iGPS-M receiver starts to provide the positioning function. it means iGPS-M is operating.

Troubleshooting
When your iGPS-M receiver could not operate, please follow the instruction to do the troubleshooting as below.
1. iGPS-M receiver’s LED is not flashing It means iGPS-M does not have power supply. Please check if the connector plugs in properly as the step II.
2. iGPS-M receiver’s LED is flashing, but the connection between iGPS-M receiver and the E-map can not be established. Please make sure the settings of COM Port Number and Baud rate are correct. l Most of E-map provides scan function to search COM Port. it for the correct COM Port number that iGPS-M receiver is utilizing. l If a RS232 cable is used to connect to PC/Lap top, the COM Port number would COM1 usually. The default Baud rate is 4800. If a USB cable is used to connect to PC/Lap top, please make sure the UBS driver is installed successfully.

iGPS-M Introduction
The iGPS-M is an outstanding high sensitivity GPS receiver. Its excellent performance easily conquers the most difficult tasks. In addition, it provides various functions to meet customers’ demand. iGPS-M employs uNav’s powerful GPS solution. It provides marvelous navigation performance under dynamic conditions in areas with limited sky view like urban canyons. It also has high sensitivity for weak signal operation without compromising accuracy. U ndoubtedly, iGPS-M is the best choice for you. Market Leading System Performance Ultra-low, user configurable power management makes iGPS-M the lowest power consuming, complete 12-channel iGPS receiver on the market. Nevertheless, here are no compromises in performance. The iGPS receiver has a navigation sensitivity as low as –150dBm making it applicable even for extremely demanding applications and environments.

iGPS-M Key Feature
Built in uNav chipset
Sensitivity: -150dBm (Tracking)
Thin module form factor – 45mm(L) x 45mm(W) x 8.5mm(H)
RTC back up and for first time to Fast Fix (TTFF)
iTALK and NMEA0183 v3.0 data protocols
Accurate 1PPS timing output
8MBit Flash Memory
3Sec Quick Start
Water resistant
Possible Application
Mapping devices for PC & Pocket PC
Personal Navigation or touring devices
AVL and Location-Based service system
Data logging for marine Navigation
Support 1pps output for timer
Tracking devices/system
Mileage Management
Fleet Management
Car Navigation

Download iGPS-M Receiver High Sensitivity 150dBm PDF User Manual


Related E-Books:

    None Found

March 17, 2010 | Posted in Electronic Manual, GPS Navigation

Comments

Leave a Reply