HTC Touch Diamond VideoMate IP50/50W Network Camera PDF Installation Guide

Mounting:
If user wants to set IP50 on the wall, please use the screws to fix the bracket on the flat surface. After the bracket is fixed on the wall,
please try to adjust the angle to the desire position.

Cable Connections:
If user connects the IP camera on the intranet, then the same group of user can share that IP camera to use.
1. Plug in the power adapter to camera.
2. Use the standard RJ-45 network cable to connect with the Compro IP 50(W). Important! If the power cable (IP50W) and the network cable (IP50) are not securely fastened, it could lead to unstable connection.

(IP50W only): Wireless Connection
On the IP50W model, you also have the option of using the wireless connection method. Please keep in mind that you can only have one active connection only, via LAN or wireless. If user connects the IP camera on the intranet, then the same group of user can share that IP camera to use. Please ensure that the wireless antenna had been securely fastened, otherwise it could lead to unstable connection.
Important!
1. The operation of the IP50W wireless network may be interfered should there be other 2.4GHz devices working in the vicinity, e.g. microwave oven, digital cordless camera, etc. You may experience slow frame rate or drops in connection; up on such situation, we suggest that you try to move the IP camera around the area or try to shut off other appliances.
2. Since wireless cameras cause interferences during transmission, you may encounter erratic behaviors when there are more than 10x operating in close proximity.
3. The default wireless connection method is via 802.11g standard and you should experience a stable connection of up to 20 meters between the access point and the camera unit. Your wireless performance may vary depending on the operating environment, building material, etc.

IP50(W) Digital I/O Connector Block
 The I/O connector on the back of the IP50W provides a central interface between your home security system and various output devices.
The two digital inputs are normally used with security sensors, e.g. passive infrared sensor (PIR), smoke detector, door/window open sensor, etc. This input works by detecting a change in the state, open…

Software Installation:
Before ComproView installation, user has to make sure the IP Camera is connected to the network.
1. Insert the ComproView installation CD.

2. Please read the license agreement, then select “I accept the terms of the license agreement”, and then press the “Next” button to continue the install process.
3. Please enter the user name and the company name.
4. Depends on user’s demand to choose the “Complete” or “Custom” selection, and then press the “Next” button to continue the install process.
5. If user chooses the “Complete” selection, please press the “Install” button to start the installation.
6. If user chooses the “Custom” selection, user could choose the specific file folder to install the program.
7. After all the setting is ready, please press the “Install” button to start the installation.
8. After the install process completed, the ComproView system is finished the installation.
9. Before using the IP camera, please run the included IP Camera Utility to customize the camera to your local condition. Up on the start of the application, you will be presented with a list of installed IP camera on your network. Please highlight the desired IP camera and click the “Wizard” button.

Download HTC Touch Diamond VideoMate IP50/50W Network Camera PDF Installation Guide


Related E-Books:

    None Found

March 6, 2010 | Posted in Electronic Manual, Gadget Manual, HTC Manual

Comments

Leave a Reply