HP Pavilion zt1100/xz100 Notebook PDF Service Manual Installation
Diagnostic Tools This section describes the following diagnostic tools you can use for troubleshooting and repairing the notebook: • e-Diagtools diagnostic program (below). • Sycard PCCtest 450 PC Card (page 3-26). • BIOS configuration utility (page 3-27).
e-Diagtools Diagnostic Program The e-Diagtools hardware diagnostic program provides two levels of testing: • Basic user-level hardware test. • Advanced individual hardware tests.
The tests are designed to run after the system restarts, so that the notebook will be in a predictable state during the tests. The tests are non-destructive, and are intended to preserve the state of the notebook. The notebook restarts when you exit the program so drivers can be loaded.
Updating e-Diagtools You can download the latest version of e-Diagtools from the HP Notebook web site (see page vi). Follow the instructions included with the new version.
Running e-Diagtools 1. Restart the notebook. 2. When the HP logo appears, press F10 to start the diagnostic test. 3. When the menu appears, press Enter to run e-DiagTools. 4. The first time you run the program, you are prompted to select the language for the program. 5. Press F2 to proceed with the basic tests. You can also proceed directly to the advanced tests from this point by pressing Ctrl-F9 (in which case skip to step 10, below). 6. When the hardware detection finishes, check the list of detected hardware.
Download HP Pavilion zt1100/xz100 Notebook PDF Service Manual Installation
Related E-Books:
- None Found
September 17, 2010 | Posted in Hewlett-Packard Manual, Notebook
Comments
Leave a Reply