Honeywell Pro Non-programmable TH3110D Digital Thermostat PDF Manual
This thermostat provides electronic control of 24 Vac single stage heating and cooling systems, heating systems or 750 mV. Install the thermostat about 5 feet (1.5 m) above the ground in an area with good air circulation at average temperature. Do not install in locations where the thermostat can be affected by:
• Drafts or dead spots behind doors and corners
• hot or cold air ducts
• Sunlight or radiant heat from appliances
• Hidden pipes or chimneys
• no heating / cooling areas such as an exterior wall behind the thermostat
Make sure your package includes the following elements:
• PRO TH3110D digital thermostat (wallplate attached to back)
• Operation
• Wall anchors and mounting screws (2 each)
• AA alkaline batteries (2)
Remove the thermostat wall plate, as shown on the left, then follow the instructions below for mounting.
1 Pull wires through wire hole.
2 Position wallplate on the wall, level and mark hole positions with pencil.
3 holes at marked positions as shown below, then tap the wall anchors provided.
4 Place wall plate anchors, insert and tighten the mounting screws
Download Honeywell Pro Non-programmable TH3110D Digital Thermostat PDF Manual
Related E-Books:
- None Found
August 29, 2009 | Posted in Honeywell Manual, Thermostats
Comments
Leave a Reply