Honeywell Electronic TL7230A Thermostat PDF User Guide
TL7230A Honeywell thermostat can be connected to an electric heater to control temperature. To remove the control module’s power base, loosen the screws below the thermostat and pull the two separate components as shown.
To install the control module on the basis of power, reversing the previous procedure. Two knobs on the back of the control module, set the limits of maximum and minimum temperature. For example, even if the control temperature setting is at 86 ° F, the temperature is kept at 77 ° F if the maximum temperature limit is 77 ° F. Use a blade screwdriver to rotate each knob up a notch points to the desired temperature limit. Each potentiometer adjustment corresponds to a temperature setting.
Honeywell warrants this product, excluding batteries, to be free from defects in workmanship or materials, under normal use and service for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell will repair or replace (at Honeywell’s option).
Download Honeywell Electronic TL7230A Thermostat PDF User Guide
Related E-Books:
- None Found
August 29, 2009 | Posted in Honeywell Manual, Thermostats
Comments
Leave a Reply