System requirements
The following computer configuration is necessary to run the Lounge Lizard Session:
Mac OS :
• Mac OSX 10.2 (Jaguar) or later.
• G4 733 MHz Processor
• 256 MB RAM
• 1024 x 768 or higher screen resolution
• MIDI Keyboard (recommended)
• Ethernet Port
• Quicktime 4.0 or later

Windows :
• Windows 98SE/ME/2000/XP
• PIII 800 MHz
• 128 MB RAM
• 1024 x 768 or higher screen resolution
• DirectX or ASIO supported sound card

Keep in mind that the computational power required by the Lounge Lizard Session depends on the number of voices of polyphony and the sampling rate used. These computer configurations will enable you to play the factory presets with a reasonable number of voices.
1.2 Installation
Mac OS
Insert the Lounge Lizard Session program disc into your CD-ROM drive. Open the CD icon once it appears on your desktop. Click on the Lounge Lizard Session Install icon and follow the instructions of the installer. If you purchased this software online, simply double-click on the installer file
that you have downloaded and follow the instructions of the installer.

Windows
Insert the Lounge Lizard Session program disc into your CD-ROM drive. Launch Explorer to view the content of the CD-ROM and double-click on the installer file to launch the installer. If you purchased this software online, simply double-click on the installer file that you have downloaded and follow the instructions of the installer.

1.3 Authorization and Registration
The Lounge Lizard Session uses a proprietary challenge/response copy protection system which requires authorization of the product. A challenge key is a long string of capital letters and numbers that is generated uniquely for each machine during the registration process. In other words, for each machine you install this program on, a different challenge key will be generated by the program. The response key is another unique string of capital letters and numbers generated from the data encrypted in the challenge key. In order to obtain a response key, you will need to connect to the A|A|S website and provide the following information:
• A valid email address
• Your product serial number (on the back of the sleeve of your CD or in your confirmation email for downloads)

1.3.1 Step 1: Generating the challenge key
After launching the installer for the first time, a pop-up window will appear asking you if you wish to authorize your product now or later. If you are ready to authorize Lounge Lizard Session now, click on the Next button otherwise click on the Authorize Later button. If your computer is connected to the internet, we recommend that you authorize your product now.

When you click on the Next button, a second window appears asking you to enter your serial number. Type your serial number as it appears on the back of the sleeve of the Lounge Lizard Session CD-ROM. If you purchased Lounge Lizard…

1.3.2 Step 2: Generating the Response key and Registering your Product
If your computer is connected to the internet, click on the link to the A|A|S web server appearing in the pop-up window. This will launch your web browser and connect you to the unlock page of the A|A|S web server. Enter your email address, serial number and challenge key in the form as shown below and click on the Submit button. The next form asks you to provide additional information about yourself including your mailing address and phone number. This information will be used to register your product. Note that only a valid email address is required to register your product. We nevertheless recommend this information be provided to ensure our support team is able to contact you to resolve any future support issues, and notify you of product updates promptly. This information is kept completely confidential. Registration of your product will entitle you to receive support and download updates when available, as well as take advantage of special upgrade…..

Download Lounge Lizard Session Software Electric Piano PDF Installation Instructions

Post from: Download Free PDF Manual

Lounge Lizard Session Software Electric Piano PDF Installation Instructions

As technology develop further and further devices become both smaller and more powerful[18]. With small portable devices such as Apple’s iPhone the only interface is the touch screen, therefore we have in this project investigated the use of alternative input using the microphone. This has been done by developing a real time instrument simulator. To make the instrument sound more natural, some techniques such as variating sounds has been investigated. This thesis is one of two in the project, my (Benjamin Eriksson) part describes how to handle high quality audio in and output in the Apple iPhone environment with it’s limited resources and how it is implemented in the iPhone project. Tomas Härdin’s part is about classifying sounds on a real time audio stream. The project has been developed at a software developing company called CodeMill AB.

1.1 Background
In late december 2008 CodeMill AB wanted to participate in a project with another local company specialized in audio software. The partner wanted to expand to the iPhone market and therefore choose to work with CodeMill. An idea of a real-time drum application which would get the input from the device’ microphone was invented. The idea was inspired by two papers on scratch input[5] and acustic emanations of computer keyboards[25]. One of the criteria for the application was to have high fidelity audio with a latency lower than 25 ms1 . This was necessary as the partnership company’s reputation lies in giving the end user the most high quality sound availible.

To be able to develop applications to Apple’s iPhone environment one must use Apple’s own development suite. This since the iPhone environment is a closed platform. The development environment is free for everyone to download and install. Applications can be installed and debugged on the iPhone Simulator in the development suite. But in order to debug on the target device, such as the iPhone and iPod touch, one must apply for the iPhone Developer Program[10]. The iPhone Simulator is however not an emulator, and does only simulate high level APIs on the host native architecture and can therefore not be used for low level

API’s and performance tests.
The Apple App Store is where the end user buys iPhone applications. The App Store can either be accessed via the iTunes Store in iTunes on a PC or Mac, or directly via an application on the device. The price for an application is set by the developer. Apple takes a 30% cut of the revenue for providing the distribution channel.

3.1 iPhone Development Setup
The iPhone development setup includes the Xcode development environment, which includes an integrated text editor as well as a graphical debugger[10]. Interface Builder is a design tool for creating graphical user interface for the CocoaToch framework. Instrumments is used for measuring processor and memory in real-time[10]. Xcode is build on top of open source tools such as GNU Compiler Collection and Subversion[12] and can also be used via a terminal as a standard UNIX command line interface.

3.1.1 iPhone Developer Program Portal
The iPhone developer program portal1 is a web portal for managing team members, certificates and provisioning profiles used for signing Applications. All applications must be signed to be able to executed on a real device[11].

Download Sound Programming in the Apple iPhone OS Environment PDF Manual Guide

Post from: Download Free PDF Manual

Sound Programming in the Apple iPhone OS Environment PDF Manual Guide

INSTALLATION:
The application is available in many languages. During the installation the program localizes itself. The available languages are English, German, French, Spanish, Japanese, Hungarian and Serbian. For installation are required minimum 4 Mbytes free spaces. The application is installing into the device memory. You cannot install it to memory card (whatever you selected memory card during the install). With the original install file you should get two skins. In later you are able to install more skins what you can download from the product home page or from vendors. Please, read the following user manual carefully before you try XSound Mp3 player for Symbian S60 5th ED Smart Phones.

USER MANUAL: OVERVIEW
I hope you successfully installed the application onto your device. At the first run the application starts slowly. It is scanning your storage devices of your phone. Next time when you start it, it should be much faster. The application is using the touch-screen interface. You are also able to use the keyboard, but do not every Symbian 5th Ed phones have a keyboard. After the application startup you can choose from three screens. You can navigate between screens with the joystick (if it is applicable), but recommended to use the touch screen of the device. Just make a movement on the screen to the left or to the right to navigate away from the current screen. You cannot navigate between the screens around. You can navigate away from the first screen to the second screen, from the second to the first and to the third screen, and from the third screen you can navigate back to the second screen. You cannot navigate between the first and the third screen. Every screen has its own purpose. Let me say few words about their usage.
The screens are:
? The Player window
? The Playlist window
? The Settings window
The screens have some common preferences. At the bottom of the window you can see the actual action what is invoked by selecting it. As it was mentioned the application is touchable, therefore just click on the screen to the specified area. In most cases a menu pops up and it?s waiting for further requests. We suggest using the light pen during the usage. It makes selecting the controls easier. The application is checking the position of your device. If you switch the position between portrait and landscape the screen layout should adjust relating to the new
position.

THE PLAYER WINDOW
This screen is used for showing information about the currently playing song. You can find information about elapsed time, duration of the song, file name, ID3Tag information (like Artist and Title of the song) etc. The screen is not used only for checking information. By clicking on the control buttons, you can invoke operations related to the song playing (recording voice, playing a track, play next or previous track, pause the playing, stop the current track). While the application is playing a track, you can reposition of the current track by clicking on the progress bar.

Download XSound Sound Player for S60 5th ED Smart Phones Version: 1.1.3 PDF User Manual

Post from: Download Free PDF Manual

XSound Sound Player for S60 5th ED Smart Phones Version: 1.1.3 PDF User Manual

Setup for Wi-Fi browsing:
1. 1. An H icon (HSPA)indicates GPRS data connection.
2. Press Menu key & select Settings
3. Go to Wireless & networks
4. Go to Wi-Fi settings
5. Press Menu & click on
6. Go to Wi-Fi sleep policy Advanced
7. Select Never
8. Back to Wireless & network settings to turn on Wi-Fi
9. Select the Wi-Fi Hotspot, e.g. PCCW
10. Confirm to connect to the PCCW Wi-Fi
11. Connected to PCCW Wi-Fi
12. Access to a website, e.g. Google

FAQ:
Q: Why do I need to change the Wi-Fi policy?
A: The handset may auto-switch to mobile data connectivity when the screen turns off, even though already connected to Wi-Fi. To avoid this scenario, please change the Wi-Fi policy to “Never”.

Q: When will it use Wi-Fi as data connection?
A: Please make sure you are under Wi-Fi coverage with mobile data turned off. If you have not turned off mobile data connection and move out from a Wi-Fi coverage, handset will auto connect to GPRS.

Q: Can the Wi-Fi settings apply to all applications in handset?
A: No, it applies to the Browser & streaming player only.

Q: How to confirm I am under Wi-Fi coverage?
A: The handset will auto detect for Wi-Fi network for every minute. If your handset attempts to connect to GPRS (”3G/H” icon appears), please turn off mobile data and browse under Wi-fi coverage.

Download Motorola Milestone Wi-Fi Browsing PDF User Guide

Post from: Download Free PDF Manual

Motorola Milestone Wi-Fi Browsing PDF User Guide

First Application Start
At first application start you will be shown the message to activate the Autostart or to turn it Off. You will be able to change this options also in the software settings afterwards.

Create New list
If you want to create the new list you need to enter the software, enter Lists menu, press Options – New and fill the following:
- Name – you need to name the list created, for example, you can name the list according to the numbers present in this list – Family, Work, Friends etc.
- Type – here you should define the type of the list – it can be Black or White list (to change the type you need to press the Fire button once)
- Phone Numbers – here you can add numbers which should be present in this list. When you enter the Phone Numbers item for the first time you will receive the ‘No data’ message with no numbers present. If you want to add some numbers you should press Options and will need to select which contact or/and group or/and number should be added or add the unknown or/and private numbers.

Reject action – Busy/Mute ringing/Busy&SMS - here you should define the action which will be happen when one of the contact number, present in the list, will be calling you. The number of lists is unlimited, but the number of active list is limited to one. It means that only one list can be activated. Note! You can deactivate all lists present, but the software will automatically activate the last one, which was activated with the help of Schedule till up to now.

…..

How to uninstall CallGuard
In order to uninstall CallGuard, please go to the Menu ? System ? Applications Manager, choose the CallGuard Application from the list and uninstall it in the usual way.

Download Symbian CallGuard v 1.0 Managing Incoming Calls Smart Phones Series 60.3 PDF Manual Guide

Post from: Download Free PDF Manual

Symbian CallGuard v 1.0 Managing Incoming Calls Smart Phones Series 60.3 PDF Manual Guide

Turn it on & off
To turn on your phone, press and hold Power (on top of the phone). To turn off your phone, press and , then touch Power hold Power off. Wi-Fi connect If you want to use a Wi-Fi computer network for even faster Internet access, touch Menu > Wireless & networks > Wi-Fi settings.
Cool content & more Browse and download thousands of the coolest apps on the planet from Android Market™. Your phone comes with a microSD memory card installed—you can load it up with photos, videos, and music from your computer using “USB drag & drop” on page 38.

Touch & hold
To open special options, touch and hold an icon or other item. Try it: In the home Contacts, screen, touch then touch and hold a contact
to open options.

Drag
To scroll through a list or move slowly, drag across the touchscreen. Try it: In the home screen, touch Contacts, then drag your Contacts list up or down. Tip: When you drag or flick a list, a scroll bar appears on the right. Drag the scroll bar to move the list to a letter A - Z. Flick
To scroll through a list or move quickly, flick across the touchscreen (drag quickly and release). Tip: When you flick a long list, touch the screen to stop it from scrolling. Zoom Get a closer look at maps or web pages. To zoom in, double-touch the screen. To zoom out, double touch the screen again.

Quick start: Home screen
The home screen gives you all your latest information in one place. It’s what you see when you turn on the phone or touch Home like this:The home screen extends beyond what you see on the screen to give you more room for adding shortcuts, widgets, and more. Flick the home screen left and right to see more panels or to add widgets or shortcuts.

Add a widget, such as a clock, music player, or a calendar that shows upcoming appointments. To open a widget, touch it. To add widgets, touch > Add > Widgets. Menu Note: If you install apps from Android Market that have widgets, touch and hold the home screen, then select a widget to add to the home screen.

Connect
Your phone uses the mobile phone network (over the air) to automatically connect to the Web. Note: Your service provider may charge to surf the Web or download data. > Settings To use a wireless network, touch Menu > Wireless & networks. Touch Wi-Fi to turn it on and touch Wi-Fi settings to search for nearby wireless networks. Touch a network to connect. Web touch tips Zoom & magnify In Web pages, when you scroll (drag or flick), zoom icons appear at the bottom of your screen.

Download Motorola Droid Technical Support PDF Manual User Guide

Post from: Download Free PDF Manual

Motorola Droid Technical Support PDF Manual User Guide