Panasonic CF-61, CF-62 Series Memori PDF Installation Guide
The Panasonic CF-61 Series comes standard with 16Mb of memory soldered. It can be expanded to a maximum of 80Mb by installing one of the following Viking Components memory options to its one available expansion slot. The Panasonic CF-62 Series comes standard with 8Mb or
16Mb of memory soldered. It can be expanded to a maximum of 40Mb or 48Mb by installing the following Viking Components memory options in its one available expansion slot.
1. Turn the computer off and disconnect the AC power supply and any other cables from the unit. Note: If the unit appears to be powered down, ensure that itis not in Suspend mode.
2. Facing the front of the computer, locate the battery on the right-side corner closest to you. Locate its connected release tab also on the same corner. Next locate the battery locking tab below the release tab. Push the locking tab down and slide the release tab to the right. Pull the battery completely out of its compartment.
November 20, 2009 | Posted in Component Manual, Panasonic Manual | Leave a Comment
Panasonic WV-NV Camera in the PODV7 Housing PDF Installation Manual
Install the quick release plate on top of the spacers already 1.installed in the housing. Note the orientation of the bracket. The securing tab must be facing the front of the housing. Secure the quick release plate into the housing using the (4) #8 bolts and star washers provided in the packet assembly. Attach the Camera
2.to the quick release plate. Attach safety lanyard to the back of the camera. Position the camera as shown below on the quick release plate and twist clockwise. 3. Complete wiring connections. Connect the RJ45 network cable to into the network input. Complete power connections. 4. Finish camera installation by securing the safety locking tab.
November 20, 2009 | Posted in Panasonic Manual, Digital Camera | Leave a Comment
Panasonic Printing System Ver. 6 PDF Installation Instructions and Manual Operation
The Panasonic Printing System Ver.6 can be used in combination with Panasonic Document Management System. This file describes the latest information about the Panasonic Printing System Ver.6 and information that is not included in the operating instructions, as well as precautions. Please read this file and the operating instructions completely before operating the Panasonic Printing System Ver.6 and our products.
About Windows 2000/XP
Panasonic has performed operational tests on the Printing System using Office 2000/XP. However, the company does not necessarily guarantee normal operation of all applications under Windows 2000/XP. Panasonic has not register the Windows 2000/XP logo for this product. Therefore, during the installation a “Digital Signature Not Found” warning message will be displayed. Click the “Yes” button to acknowledge the warning message and continue with the installation.
November 20, 2009 | Posted in Panasonic Manual, Software, Printer | Leave a Comment
Panasonic DMC-TZ5 Digital Camera Firmware PDF Installation Instructions
Check Firmware Version
1) Insert an SD Card with at least one image (photo/picture) into the SD Card Slot of the camera.
2) Set the camera’s Power Switch (A) to ON.
3) Set Playback/Recording Switch (B) to PLAYBACK.
4) While holding down the E.ZOOM button (C), press the MACRO button (D).
NOTE: This will display the firmware version on the LCD screen (E).
5) Power the camera OFF after checking the firmware version.
CAUTION: If the firmware version in the camera is the same or higher than the firmware version downloaded or received, a firmware update is unnecessary.
Preparation of SD Card
1) Insert an 8 MB or larger SD Card into camera.
2) Format the SD Card using FORMAT option in camera menu.
3) Take 2 photos with camera.
4) Remove SD Card from camera.
5) Power the camera off.
November 20, 2009 | Posted in Panasonic Manual, Digital Camera | Leave a Comment
