Mitsubishi Electric Air Conditioner CMY-R100VBK Twinning Kit PDF Installation Manual
1. Confirming the Package Contents
The following items are included with the Twinning Kit (CMY-R100VBK, CMY-R200VBK). Verify that all items are present before starting installation. Always use the twinning pipes included in the kit when preparing the twinning kit. If the pipes field-supplied do not fit the parts in the kit, use the accessory piping parts listed below.
(1) Package contents
(2) List of field-supplied parts
· Refrigerant pipes other than the ones provided in the kit
· Heat-resistant insulation material (for field-supplied refrigerant pipes)
· Insulation cover tape
2. Selecting the Correct Size Refrigerant Pipes and Using t
(1) Pipe size
1 Field-supply the pipes to be connected to the kit.
2 Choose the correct size pipe using the table below. Connect the field-supplied pipe to the twinning kit for the sizes in the table that are marked
with an asterisk (*).
3 If the pipe was cut with a pipe cutter, remove the burrs and eliminate foreign materials before connecting.
? On the low-pressure side, the twinning kit connects to the pipes field-supplied inside the outdoor unit.
January 6, 2010 | Posted in Mitsubishi Manual, Electronic Manual | Leave a Comment
Mitsubishi MELSEC-A Series and MELSECNET/MINI-S3 Data Link System PDF Installation and Maintenance Manual
Use within operating ambient temperature.Do not use where temper-atures can rapidly change even though it is within the specifications.Foreign objects should be prevented from entering the product.Contamination by foreign objects,such as wire chips will cause fire,breakage,and malfunction.Use within the operating environment of the protection structure.Avoid using IP20 where water or oil,etc.can be splashed.IP65 isachieved by mounting on manifold solenoid valve and process wireentry correctly.Carry out regular checks to confirm correct operation.Safety may notbe maintained by unintentional malfunction or incorrect operation.
This SI unit is able to connect to Mitsubishi Electric Corp.PLC,MELSEC-A series,MELSECNET/MINI-S3 Data Link system.This SI unit has 16 output points (2 stations).Maximum is 512 I/Opoints (64 stations) per PLC master unit.
January 6, 2010 | Posted in Mitsubishi Manual, Electronic Manual, Phone/Fax Machine | Leave a Comment
