Bluetooth GPS Set-Up PDF Manual Guide

To set up a Bluetooth connection with your Globalsat GPS receiver, follow these steps:
1. Tap the Bluetooth icon in the lower-right corner of the screen
2. Select “Turn radio ON”
3. Tap the Bluetooth icon again and select “Add a Bluetooth Device”
4. Check “My Device is set up and ready to be found” in the “Add Bluetooth Device Wizard” and click “Next”.
5. Select “New Device” from the displayed Bluetooth devices and tap “Next”.
6. Tap “Use the passkey found in the documentation”.
7. Enter the Passkey Code (or PIN code) for the GPS receiver and select “OK” (For the BT-308 passkey code is 2003 and for the BT-328, BT-338 & BT-359 GPS receivers it’s 0000).
8. Bluetooth Manager will display and designate an Outgoing and Incoming port for your device. (NOTE: Utilize the Outgoing port for third party navigation application port configuration.)
9. Select “Finish” to complete Bluetooth device configuration.
NOTE:
In most cases, mapping and navigation software require you to manually configure the assigned COM port of the GPS receiver in order to properly communicate and retrieve the GPS data. See your PDA’s User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly configure the GPS COM port to be read.

To set up a Bluetooth connection with your Globalsat GPS receiver, follow these steps:
1. Tap the Bluetooth icon in the lower-right corner of the screen
2. Select “Turn radio ON”
3. Tap the Bluetooth icon again and select “Bluetooth Manager”
4. Tap “Yes” in the “Bluetooth Manager” window
5. Select the proper Bluetooth GPS receiver and tap “Save”
6. Tap “OK” to save the GPS to the “All devices” group
7. Tap “OK”
8. Tap the proper Bluetooth GPS icon
9. Go to “Actions” and tap “Create bond with this device”
10. Enter the Passkey Code (or PIN code) for the GPS receiver and select “OK” (For the BT-308 passkey code is 2003 and for the BT-328, BT-338 & BT-359 GPS receivers it’s 0000).
11. Close the “Bluetooth Manager” window
12. Launch your third-party navigation application.
NOTE:
In most cases, mapping and navigation software require you to manually configure the assigned COM port of the GPS receiver in order to properly communicate and retrieve the GPS data. See your PDA’s User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly configure the GPS COM port to be read.

Download Bluetooth GPS Set-Up PDF Manual Guide


Related E-Books:

    None Found

Others Search:

hp bt-308 manual

June 9, 2010 | Posted in Bluetooth Manual, GPS Navigation

Comments

Leave a Reply