Acer S200 Smartphone PDF User Guide

Installing or removing the battery
Your smartphone uses a replaceable battery to provide power. It is packed seperately from your smartphone and needs to be inserted and charged before you can use the smartphone. Installing the battery Slide your fingernail into the gap between the battery cover and the smartphone. Gently apply pressure upwards to remove the battery cover. Place the battery into the battery compartment, lining up the battery
connectors with those at the middle of the compartment. Insert the tabs on the bottom of the battery cover into the slots in the smartphone.
Carefully press the top of the cover until the cover snaps in place.

Charging the battery
For initial use, you need to charge your smartphone for eight hours. After that you can charge it each day to recharge the battery to full capacity. Connect the AC adapter cord to the mini USB connector on your smartphone. Removing the battery Open the batterycompartment as shown in “Installing the battery“ on page 12. Lift the battery out of the compartment using the clip on the top of the battery. Replace the battery cover as described above.

Installing a SIM card or microSD card
To take full advantage of your smartphone’s telephony capabilities, you must install a SIM card. The SIM card holder is located at above the battery bay. Additionally, you may wish to increase your smartphone’s storage by inserting a microSD card into the slot provided. This
is next to the SIM card slot.
1. Turn off the smartphone by pressing and holding the power button.
2. Open the cover and remove the battery as described in “Installing or removing the battery“ on page 12.
3. Insert the SIM or microSD card as shown.
4. Replace the battery and battery cover.

SIM card lock
Your smartphone may come with a SIM card lock, i.e., you will only be able to use the SIM card provided by your network operator.
To cancel the SIM lock, contact your network provider. Turning on for the first time To turn on your smartphone for the first time, press and hold the power button until the system bootup screen appears. The smartphone will vibrate during the boot sequence. Follow the setup screens to set up your smartphone.

Entering your PIN
When you install a SIM card for the first time, you will have to enter a PIN using the onscreen number pad.

Connecting to your PC and synchronizing data
You can synchronize the data on your smartphone with the data on your PC using the supplied USB sync cable and the Windows Vista Sync Center or ActiveSync. Refer to “Connecting to a PC and synchronizing“ on page 56 for more details on connecting and synchronizing.

Download Acer S200 Smartphone PDF User Guide


Related E-Books:

    None Found

March 16, 2010 | Posted in Acer Manual, Electronic Manual, Gadget Manual, Smart Phone

Comments

Leave a Reply