Canon Pixma Bubble Jet Printer iP1500 PDF Service Manual


At the end of Reconstruction, and the Canon printers first transport conditions (with the paper lifting plate in the raised position and locked in the first transport position), the following steps.
1. Install the print head, and while pressing and holding the power button, connect the plug. After the light is green, with the power button still pressed, press the Continue / Cancel button 2 and let the force and Resume / Cancel button. (Each time the Resume / Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
2. Print Shipment Inspection pattern, and restore the EEPROM in accordance with the procedures in the 4th Service mode.
3. Press the power button to turn off the Canon printer. (Paper lifting plate is raised and the transportation to move the print head replacement.) Remove the printhead. (Not to print after that date.)  Read Full Manual

June 19, 2011 | Posted in Canon Manual, Printer | Leave a Comment

Toshiba Wireless Troubleshooting Tips PDF Manual

Wireless connectivity issues and troubleshooting. Wireless connection problems frequently occur for the following reasons:
• Disabled wireless network adapters improperly configured network settings wireless
• insufficient credentials for authentication or missing permissions for admission
• Distance, interference or other obstructions between the wireless devices.

For these reasons, Toshiba recommends the troubleshooting Wireless includes the following: Make sure the first wireless LAN switch is on. For most Toshiba laptops, there is this switch on the front left side of the laptop. Consult your user manual for more information on where the switch is on the system. Make sure the wireless device is properly configured and activated.

• In Windows, one way to do this to check the Device Manager settings for network adapters. Click “Start” Control Panel “” “System”, “material”, “Device Manager” and “Network Adapter”. Double-click the wireless adapter to check the settings. If the device is enabled and configured properly, under the “General” tab, then “Device Settings” information as follows: “This device is working properly.”  Read Full Manual

June 19, 2011 | Posted in Toshiba Manual, Wireless | Leave a Comment

Lenovo ThinkPad T500 and W500 Hardware Maintenance Manual

When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. In some modes, you need to peel the thin
film off from the rubber

When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it:
__ 1. Name and phone number of servicer
__ 2. Date of service
__ 3. Date on which the machine failed
__ 4. Date of purchase
__ 5. Failure symptoms, error codes appearing on the display, and beep symptoms
__ 6. Procedure index and page number in which the failing FRU was detected
__ 7. Failing FRU name and part number
__ 8. Machine type, model number, and serial number
__ 9. Customer’s name and address  Read Full Manual

June 10, 2011 | Posted in Computers, Lenovo Manual, Notebook | Leave a Comment

IBM Mobile Systems ThinkPad Computer Hardware Maintenance Manual

Note for the APM operating system: Even if you do not set the low-battery alarm, the charge indicator notifies you when the battery is low, and then the computer enters the power-saving mode automatically. This default low-battery behavior is independent of the operating system; so if you have set the low-battery alarm, the computer may not do what you specified. It chooses either your setting or the default setting, whichever is appropriate.

If you are using the ACPI operating system, only the low-battery alarm is available. To cause the computer to return from standby mode and resume operation, do one of the following: Press the Fn key. Open the LCD cover. Turn on the power switch. Also, the computer automatically returns from standby mode and resumes operation in either of the following events:  Read Full Manual

June 10, 2011 | Posted in Electronic Manual, Lenovo Manual, Notebook | Leave a Comment

Polaroid PoGo Instant Mobile Printer PDF Manual

The following is an example for connecting to the printer and print your images. The terminology used in your cell phone may be different.

1. Select the image you would like to print from the stored images on your camera cell phone. In the “options” menu, select “send via Bluetooth.” Search for devices and select the Polaroid printer and print.
2. If you are unable to print from “send via Bluetooth,” select “connectivity” or “Bluetooth” under the “settings” or “tools” menu. Search for devices and select the Polaroid printer. Once paired, go back to stored images and select the image you want to print. In the “options” menu, select “beam” or “send via Bluetooth”. Select the Polaroid printer and print.
3. If your camera cell phone does not include “send via Bluetooth” under the “options” menu, select the image you want to print. Select the “options” menu and select “print via Bluetooth”. Search for devices, select the Polaroid printer, and print.  Read Full Manual

June 10, 2011 | Posted in Printer | Leave a Comment

Using Olympus E-420 Digital Camera for iWitnessPRO PDF Manual

In subsequent surveys, that’s about the only thing one needs to do for “camera setup”; assure the “14mm” is aligned with the tick mark as noted above. This setup is good for imaging at the 14mm focal length (which is equivalent to 28mm focal length in standard 35mm film format.) This 14mm zoom setting, for this camera, is recommended for most photogrammetry imaging projects.

Note in the image below. The “MF” is most likely going to be initially highlighted in the box presented with “S-AF”. If that is the case, the camera is currently set to Single shot, Auto Focus. This “S-AF” changed to “MF” is what you are going to do for the purposes of photogrammetry. Once it is setup as MF, your job will be to assure the lens is at 14mm, then turn the camera on, verify the Control Mode dial is on “A” with F11 and push the shutter button while the camera’s flash is up.  Read Full Manual

June 10, 2011 | Posted in Digital Camera, Olympus Manual | Leave a Comment